Office Address:4th floor, Chuangrong Building Block C, Danshan Road, AnzhenStreet, Xishan District, Wuxi, Jiangsu, China.
Factory Address:No.26 Jingrui Rd, Xibei Town, Xishan District, Wuxi, Jiangsu, China.
Skype: tnjd168
Email:info@powermaxgasifiers.com
Email:sales@powermaxgasifiers.com
Mobile/WhatsApp: +86-13812083566
Tel:+86-510-68229610
The 300 series gas generator
sets are widely used in clean energy power generation and comprehensive
utilization of waste heat,such as syngas,straw gas, coal gas, natural
gas, biogas, blast furnace gas, coke oven gas, blue carbon gas, etc. The
rotate speedis mainly at 500r/min and 600r/min,and the power ranges
from 400kW to 3000kW. The 300 series gas generator sets use various
combustible gas as raw materials for combustion to drive the engine to
generate electricity. The engines based on Xichai 300 diesel engine,
combined with the advantages of the large cylinder bore and long stroke
of 300 diesel engine. The generator sets have ave fully learned from
the advanced gas engine technology both at home and aboard. Targeted
improvement and R&D have been conducted to meet the requirements of
all kinds of combustible gas to ensure the combustion function and
reliability of gas engine. In this case, the generator sets can run more
smoothly and run for a longer period under full load. Moreover, the
interconnection can be more convenient, and the comprehensive efficiency
of co-generation can be realized by utilizing waste heat. 300 series
gas generator sets can output at high, medium, and low voltage, achieve
automatic parallel and grid connected, and have become the most popular
exported products among the same power.
Applicable Air Source Conditions of Generator sets
Coal Gas should be properly
defocused, filtered, gas-liquid separated, and stabilized before use. If
the gas is at a high temperature, it should be treated in a cooling
system, and the gas temperature should not exceed 40 °C before
temperature, it should be treated in a cooling system, and the gas
temperature should not exceed 40 °C before entering the machine. Air
source conditions: pressure 2.5-10kpa, pressure change rate ≤1kPa/min,
tar content ≤50mg/Nm3, ≤50mg/Nm3, ≤20mg/Nm3, moisture content≤40mg/Nm3,
impurity particle size≤5μm, impuritycontent≤30mg/Nm3, required gas
calorific value≥4MJ/Nm3.
|
project |
Technical specification |
||||||||
|
Generator sets |
Model of the set |
600GFLS |
700GFLS |
1200GFLS |
1400GFLS |
||||
|
Rated Power(KW) |
600 |
700 |
1200 |
1400 |
|||||
|
Rated Voltage(KV) |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
|
|
Rated Current(A) |
1083 |
984 |
1263 |
1148 |
2165 |
1968 |
2526 |
2296 |
|
|
Rated Frequency(HZ) |
50 |
60 |
50 |
60 |
50 |
60 |
50 |
60 |
|
|
COS Φ Power Factor |
0.8 Lagging |
||||||||
|
Mode of Excitation |
Brushless |
||||||||
|
Phase & Connection |
3 Phases 4 Wires |
||||||||
|
Generator Model |
1FC6 SIEMENS |
||||||||
|
Overall Dimensions(mm) |
6500*1830*3100 |
8287*2421*2782 |
|||||||
|
Net Weight(kg) |
22000 |
40000 |
|||||||
|
Engine |
Model of Engine |
TNJD-8300Q3 |
TNJD-8300Q4 |
TNJD-16V300Q3 |
TNJD-16V300Q4 |
||||
|
Mode |
Water-cooling,Four-stroke,Spark plug ignition,Open combustion chamber |
||||||||
|
Natural aspirated |
|||||||||
|
Arrangement of Cylinder |
直列8缸 |
V型16缸 |
|||||||
|
Cyclinder Diameter(mm) |
300 |
||||||||
|
Stroke(mm) |
380 |
||||||||
|
Rated Power(KW) |
660 |
770 |
1320 |
1540 |
|||||
|
Speeding(r/min) |
500 |
514 |
600 |
500 |
514 |
600 |
|||
|
Direction of Rotation (Dependent on Flywheel Start-up Mode) |
Counterclockwise |
||||||||
|
start-up Mode |
Compressed Air |
||||||||
|
Exhaust Temperature of Cylinder(℃) |
≤580 |
||||||||
|
Temperature of Gas Tunrel Boring Machines(℃) |
≤40 |
||||||||
|
Gas Pressure(Kpa) |
≥2.5 |
||||||||
|
Oil Consumption(g/kwh) |
≤1.0 |
||||||||
|
Project |
Technical specification |
||||||||||||||||||||
|
Generator sets |
Model of the set |
800GFLS |
900GFLS |
1000GFLS |
1200GFLS |
1500GFLS |
1700GFLS |
1800GFLS |
2000GFLS |
2400GFLS |
3000GFLS |
||||||||||
|
Rated Power(KW) |
800 |
900 |
1000 |
1200 |
1500 |
1700 |
1800 |
2000 |
2400 |
3000 |
|||||||||||
|
Rated Voltage(KV) |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
0.4 |
0.44 |
|
|
Rated Current(A) |
1443 |
1312 |
1624 |
1476 |
1804 |
1640 |
2165 |
1968 |
2706 |
2460 |
3067 |
2788 |
3248 |
2952 |
3609 |
3280 |
4330 |
3936 |
5413 |
4920 |
|
|
Rated Frequency(HZ) |
50 |
60 |
50 |
60 |
50 |
60 |
50 |
60 |
50 |
60 |
50 |
60 |
50 |
60 |
50 |
60 |
50 |
60 |
50 |
60 |
|
|
COS Φ Power Factor |
0.8 Lagging |
||||||||||||||||||||
|
Mode of Excitation |
Brushless |
||||||||||||||||||||
|
Phase & Connection |
3 Phases 4 Wires |
||||||||||||||||||||
|
Generator Model |
1FC6 SIEMENS |
||||||||||||||||||||
|
Overall Dimensions(mm) |
6500*1830*3100 |
7264*2300*3465 |
8904*2360*3286 |
8287*2421*2782 |
10410*2760*3420 |
||||||||||||||||
|
Net Weight(kg) |
23000 |
30000 |
40000 |
4000 |
6000 |
||||||||||||||||
|
Engine |
Model of Engine |
TNJD-8300T |
TNJD-G6300T |
TNJD-G8300T |
TNJD-16v300T |
TNJD-G16v300T |
|||||||||||||||
|
Mode |
Water-cooling,Four-stroke,Spark plug ignition,Open combustion chamber |
||||||||||||||||||||
|
supercharge、inter-cooled |
|||||||||||||||||||||
|
Arrangement of Cylinder |
L-8 |
L-6 Messages
Wuxi Powermax Renewable Energy Technology Co.,Ltd.(Wuxi Teneng Power Machinery Co.,Ltd.) is located in Wuxi City Jiangsu Province, which is a c
ity on the Yangtze River between Suzhou and Nanjing, and ...
Product Catalog
| |||||||||||||||||||
中文
EN
ENGLISH
简体中文